{"product_id":"speedslick-pro-bearing-oil-by-livelica-1","title":"Speedslick Pro Bearing Oil by LiveLica","description":"\u003cp\u003eSpeedslick Pro is LiveLica's own bearing oil, made for the job most skaters try to do with whatever oil is in the garage. It is a light oil intended for skate bearings, and the idea is simple. One drop per bearing lowers friction, so the wheel keeps rolling for longer after you stop pushing. It comes in a 10 ml bottle with a fine tip, which is enough to service many sets of bearings.\u003c\/p\u003e\n\u003ch2\u003eWhat Speedslick Pro is\u003c\/h2\u003e\n\u003cp\u003eIt is a light lubricating oil for the ball bearings inside inline, quad and short track skate wheels. Bearings turn thousands of times per lap, and the smoother they turn, the more of your push becomes forward speed rather than heat and drag. A clean bearing with the right oil spins freely. A dry or badly oiled bearing feels slow and noisy, and wears out faster.\u003c\/p\u003e\n\u003ch2\u003eHow to use it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove the wheels and take the bearings out of the hubs.\u003c\/li\u003e\n\u003cli\u003eIf the bearings are dirty, clean them first and let them dry fully. Oil traps grit, so oiling a dirty bearing does more harm than good.\u003c\/li\u003e\n\u003cli\u003eAdd one drop of Speedslick Pro into each bearing, through the shield or onto the balls if the shield is removed.\u003c\/li\u003e\n\u003cli\u003eSpin the bearing by hand for a few seconds to spread the oil evenly.\u003c\/li\u003e\n\u003cli\u003eWipe away any excess, refit the bearings and wheels, and you are ready to skate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eHow much and how often\u003c\/h2\u003e\n\u003cp\u003eOne drop per bearing is enough. More oil is not faster, because a flooded bearing collects dust and drags. Re oil when the roll starts to feel short or the bearing sounds gritty, rather than on a fixed schedule. Skaters who train in dust or wet conditions will need to clean and re oil more often than those who skate indoors on clean floors.\u003c\/p\u003e\n\u003ch2\u003eWhy a purpose made oil matters\u003c\/h2\u003e\n\u003cp\u003eHousehold oils tend to fall into two traps. Thick oils, like heavy machine oil, protect well but drag, which slows you down. Very thin oils feel fast at first but thin out or evaporate within a session, leaving the bearing dry. A light oil made for skate bearings is meant to sit between those extremes, so it keeps the bearing fast without washing out after a few laps.\u003c\/p\u003e\n\u003ch2\u003eWhat it works with\u003c\/h2\u003e\n\u003cp\u003eSpeedslick Pro suits standard 608 skate bearings and works across the range of steel and ceramic bearings, so it pairs with any set in our \u003ca href=\"https:\/\/www.livelica.com\/collections\/speed-bearing\"\u003espeed bearings collection\u003c\/a\u003e, from entry level steel through to \u003ca href=\"https:\/\/www.livelica.com\/products\/power-bearings-swiss-ceramic\"\u003ePower Bearings Swiss Ceramic\u003c\/a\u003e. Even ceramic bearings, which tolerate heat and water better than steel, still need clean oil to run at their best.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many bearings does one bottle service?\u003c\/h3\u003e\n\u003cp\u003eSince you use only one drop per bearing, a 10 ml bottle covers many full sets. A standard pair of four wheel inline skates uses sixteen bearings, so a single bottle lasts a long time in normal use.\u003c\/p\u003e\n\u003ch3\u003eCan I use it on ceramic bearings?\u003c\/h3\u003e\n\u003cp\u003eYes. Ceramic bearings still need light lubrication to spin freely and to protect the races. One drop per bearing is the same routine as with steel.\u003c\/p\u003e\n\u003ch3\u003eDo I need to clean my bearings before oiling?\u003c\/h3\u003e\n\u003cp\u003eIf they are dirty, yes. Oil binds to grit, so oiling a dirty bearing traps dust inside and slows it down. Clean first, dry fully, then add one drop.\u003c\/p\u003e\n\u003ch3\u003eWill more oil make me faster?\u003c\/h3\u003e\n\u003cp\u003eNo. Too much oil attracts dust and adds drag. One drop per bearing is the sweet spot between protection and speed.\u003c\/p\u003e\n\u003ch3\u003eWhich skates is it for?\u003c\/h3\u003e\n\u003cp\u003eAny skate that runs standard skate bearings, including inline speed skates, quad skates and short track boots.\u003c\/p\u003e\n\u003cp\u003eNew to bearing care? Read our \u003ca href=\"https:\/\/www.livelica.com\/blogs\/inline-speed-skating\/how-to-choose-the-best-bearings-for-inline-speed-skating-beginner-to-pro-guide\"\u003ebeginner to pro guide to choosing bearings\u003c\/a\u003e, or see the full \u003ca href=\"https:\/\/www.livelica.com\/blogs\/inline-speed-skating\/best-inline-speed-skating-bearings\"\u003ePower Bearings range with prices\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nothing Before Sports","offers":[{"title":"Default Title","offer_id":43190886662353,"sku":null,"price":500.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/6317\/1537\/files\/BrownBeigeBoldBrandingPromotionalPortraitInstagramPost_07df2c05-e93d-4d7b-b7b7-53db90cc082d.png?v=1784591693","url":"https:\/\/shop.kibisports.com\/en-intl\/products\/speedslick-pro-bearing-oil-by-livelica-1","provider":"KIBI SPORTS","version":"1.0","type":"link"}